Effectively recovering the condensed water of low-pressure steam under various pressures that cannot be directly used has always been a major problem for thermal energy management departments in all walks of life. For many years, the RD tea...

1. In the production process of heat exchange equipment, drying room, rapid heat exchanger, distillation equipment, etc., which require rapid heating, and production heating equipment that does not allow condensed water, mechanical traps sh...

2. Condensate recovery equipment has the following advantages: 1. Increasing the boiler feed water temperature can greatly reduce fuel consumption, and at the same time increase boiler evaporation, which can better cope with changes in boil...

The open condensate recovery device is to collect the steam condensate discharged from the steam equipment through the trench pipeline to an open underground pool. The steam carried by the condensate water and the secondary steam that flash...

1. Control the fluid speed to about 30m/S to prevent cavitation damage, the fluid channel is labyrinth, and the fluid direction is constantly changed; the allowable pressure difference is 25MPa. 2. The throttle surface is separated from the...

When selecting a trap, the drainage volume of the trap must be selected by multiplying the equipments hourly steam consumption by 2-3 times the selection ratio as the maximum condensed water volume. In order to ensure that the trap can disc...